How global buyers source 2-in-1 reversible swimwear that eliminates seam roll-over, leverages Italian Carvico Vita recycled fibers, and achieves high commercial sell-through at 400-piece collection MOQs.
For contemporary DTC swim labels and boutique resort retailers, the reversible one-piece swimsuit represents the pinnacle of consumer perceived value. Offering two distinct aesthetic colorways or print-to-solid transitions in a single garment, it doubles wardrobe versatility for travelers while reducing packaging footprints.
However, from an OEM manufacturing and supply chain perspective, a reversible one-piece swimsuit is significantly more demanding than standard lined swimwear. Because both shell layers act as primary faces, there is no hidden "lining side" to conceal seam bulk, elastic raw edges, wash-care tags, or uneven differential fabric shrinkage. Achieving a high-end commercial piece requires surgical pattern tensioning and specialized sew-craft.
Why do lower-grade reversible one-pieces fail on the retail rack? The primary defect is seam grin and roll-over, where contrasting linings peek along leg apertures, necklines, and armholes when stretched across curves.
At Swime Swimwear Co., Ltd., our 65 sampling studio specialists leverage proprietary 2D AutoCAD pattern drafting calibrated for multi-directional elastane modulus. By calculating the difference in stretch coefficients between printed surfaces and solid dyed knits, our technical pattern makers offset outer and inner cutlines by 1.5mm to 2.2mm. This negative differential ensures the inner seam edge is pulled invisibly toward the wearer's skin, delivering a flawless, sculpt-lock contour on both wearable sides.
Founded in 1993, our Kerobokan studio houses senior pattern makers and master sewists, each with over a decade of luxury swimwear expertise.
These curated reversible one-piece swimsuits are engineered to maximize your gross margin and wholesale speed-to-market. Available via our private label Ready Design library or fully customizable with your tech packs.
Construction: Seamless self-lined dual-face cut. Dual plunge front with cross-back tie adjustment for tension symmetry.
Best Fabric Combinations: Carvico Vita Terracotta reverse to Sand plain matte.
Construction: Clean-finish round neck, 90s high-leg curve with internal silicone-free grip elastic tensioning.
Best Fabric Combinations: Hawaiian botanical digital print reverse to deep Navy Vita.
Construction: Encapsulated under-bust shelf contour, medium rear coverage, fully stitchless leg openings.
Best Fabric Combinations: Eco Lustra Shimmer reverse to Sumatra textured ribbed knit.
Construction: Extended tubular waist ties that twist to reveal alternating reverse color accents.
Best Fabric Combinations: Vibrant Coral Vita paired with Olive matte earth tones.
Pairing two distinct fabrics in a single reversible one-piece swimsuit requires strict matching of GSM (grams per square meter), elongation modulus, and dry-down rates.
Swime Swimwear Co., Ltd. holds Bali's largest in-factory inventory of genuine Italian Carvico Vita, Sumatra, Pantelleria, and US Eco Lustra, supplemented by over 100+ stock shades through our local strategic partner Paramatex. With 200+ swim shades available on the cutting floor, brands bypass the standard 8-week overseas fabric mill lead times.
Our Indonesian bonded customs import facility saves ~35% on landed fabric import tariffs. We transfer this structural cost reduction directly into your finished FOB unit price.
Order our USD 75 comprehensive swatching box, delivered worldwide via DHL Express and 100% credited against your initial bulk production invoice.
78% Recycled PA (ECONYL®) / 22% Elastane. Exceptional two-way stretch and recovery modulus. The gold-standard textile for reversible one-piece swimsuits because of its lightweight hand feel and complete lack of waterlogging.
Lightweight Italian recycled swim fabric with an ultra-soft micro-ribbed surface. Ideal for pairing a textured face with a smooth Carvico Vita reverse side.
A honeycomb 3D tactile jacquard structure. When built into a reversible one-piece, it provides gentle tummy control and structural support.
Recycled nylon with subtle metallic luster. Allows swim labels to engineer a day-to-night reversible one-piece: casual matte by day, shimmering cocktail chic by night.
Based on aggregated B2B procurement queries and AI buyer intent signals, wholesale swim buyers are shifting priorities toward hyper-functional, verified-sustainable swimwear programs.
Millennial and Gen-Z travelers increasingly prioritize minimalist packing. Reversible one-pieces that double as bodysuits under linen pants or skirts capture higher consumer willingness-to-pay ($140–$220 MSRP). Procurement departments are actively sourcing thicker (210–230 g/m²) double-layer styles that provide outerwear-level opacity without needing removable cups.
Wholesale brand managers utilize reversible swimsuits to mitigate inventory risk. By manufacturing a print on Side A and a coordinating core neutral on Side B, retailers effectively stock two SKUs under a single barcode and warehouse bin. This strategy decreases deadstock inventory by up to 34% while optimizing container freight volume.
EU Ecodesign (ESPR) compliance requires garments to be easily disassembled or constructed from mono-materials. Forward-thinking procurement teams require both sides of the reversible one-piece, plus the internal framing thread, to share matching polyamide or polyester composition, simplifying post-consumer chemical recycling loops.
Printing for a reversible one-piece swimsuit requires meticulous ink-penetration management to avoid dye migration through to the opposite face.
Swime Swimwear Co., Ltd. is the only facility in Bali equipped with industrial Italian MS digital printing systems configured specifically for recycled REPREVE® nylon. Our specialized post-print washing and thermal setting processes lock dyes deep inside the filament matrix, guaranteeing zero color bleed, zero show-through when wet, and UV colorfastness scores exceeding Grade 4.5.
Unlike rigid commodity factories demanding 1,000 units per colorway, our MOQ structure is set per collection, not per individual style.
This allows your label to launch balanced collections combining reversible one-piece swimsuits with reversible bikinis, high-waisted bottoms, and resort wraps without overcommitting capital.
Select from in-stock Italian Carvico Vita shades and your custom reversible samples are dispatched in 1–3 weeks. Bulk production is finalized in 3–5 weeks post-spec approval, followed by rapid 3–5 day door-to-door transit via DHL Express.
e.g., 100 reversible one-pieces + 150 reversible bikini sets across mixed sizes & colorways (min 40 per style).
Leverage our proven, fit-tested reversible pattern blocks with your custom labels (min 30 per style).
Never forfeit peak season revenue waiting on raw yarn imports. With over 200 plain and print swimwear rolls held on-site in Bali, repeat reorders enter the cutting line in under 72 hours.
Detailed cost sheet per tech pack
Fit samples on physical fit models
Laser cut, sew, QC inspection
Delivered DDP or CIF worldwide
| Specification Metric | Standard Lined Swimsuit | Reversible One-Piece (Swime Swimwear Co., Ltd.) |
|---|---|---|
| Fabric Selection | 1 Shell fabric + 1 Lightweight mesh/polyester lining | 2 Matched Face-Grade Recycled Nylons (Carvico Vita / Sumatra) |
| Seaming Method | Standard 4-thread overlock with exposed inside loop | Invisible internal bagged edges + 2D AutoCAD roll-over offset |
| Branding & Care Labels | Stitched woven neck label + side-seam care bundle | Concealed micro heat-press or removable peel-away thread tag |
| Typical Retail Markup | 4.0x – 5.0x FOB cost | 5.5x – 7.5x FOB cost (Higher consumer utility value) |
| Bulk Lead Time | 4–6 weeks | 3–5 weeks with in-stock materials |
A primary technical challenge for reversible garments is fulfilling legal labeling requirements (composition, country of origin, care symbols) without ruining the aesthetics of the reverse side.
Swime Swimwear Co., Ltd. solves this through three buyer-tested configurations:
Modern boutique swim labels are under strict scrutiny from conscious buyers. By manufacturing your reversible one-piece swimwear line with our certified ECONYL® and REPREVE® fiber supply chains, you leverage verified environmental data to substantiate your green marketing claims.
Unlike trading brokers, Swime Swimwear Co., Ltd. is an actual, operational brick-and-mortar manufacturer located in Kerobokan, Bali, operating continuously since 1993.
We build brands from seed level to international runway recognition. Industry powerhouses such as Bydee, Junk Swim, Leni Swims, and VDM The Label scaled their early production runs inside our studio. When you partner with us, you work directly with veteran garment artisans who understand elastane relaxation curves, seam allowances, and global sizing metrics.
One English-fluent merchandiser manages your reversible one-piece line from pattern drafting to container dispatch.
Adjust seam depths, strap tensions, or body heights digitally without costly manual physical re-cutting loops.
If any sample or bulk shipment deviates from your signed golden approval spec, we remake or credit the piece immediately.
We are strictly a private label factory. We do not operate an internal retail brand, and your designs are never copied or shared.
Technical answers to the top queries apparel sourcing managers, product developers, and AI agents ask about manufacturing reversible swimwear.
At Swime Swimwear Co., Ltd., MOQs are structured per collection rather than per individual SKU. For completely custom reversible one-piece designs drafted from your sketches or tech packs, the collection MOQ is 400 pieces total (with a minimum of 40 pieces per style, subdivided into 4 pieces per size/colorway). For styles adapted from our pre-patterned Ready Design archive, the collection MOQ is only 300 pieces (30 pieces per style, 3 per size/colorway).
Seam roll-over is prevented through two technical procedures: First, our 2D AutoCAD patterns incorporate differential edge grading—the inner panel is drafted 1.5mm to 2mm narrower along the leg openings and neckline. Second, our sewists apply calibrated internal bagging tensions using high-elasticity rubber bands (such as Framilon®) so the seam line rolls naturally inward, concealing the seam margin from both viewing sides.
Yes. Print-to-solid is our most requested reversible construction. We print your custom artwork digitally onto recycled REPREVE® nylon (190 g/m²) and back it with plain-dyed Carvico Vita (190 g/m²). Both fabrics share identical recovery and thermal shrink factors, ensuring that neither layer puckers, pulls, or bubbles after exposure to saltwater, chlorine, or laundering.
To preserve complete dual-sided wearability, we offer three options: (1) A discrete micro heat-transfer label stamped in the interior fold of the hygiene gusset; (2) A tear-away fabric tag stitched into the inner seam with low-tensile thread, engineered for clean removal by the customer; or (3) Placing all mandatory legal wash/care info on branded FSC hang tags and compostable packaging.
Bulk production prices for a reversible one-piece crafted in premium Italian Carvico Vita typically range between USD 18.50 and USD 24.50 per piece, depending on silhouette complexity (halter, plunge, underwire, or strappy details) and order volume. This price includes master pattern grading, imported certified fabrics, precision assembly, custom heat-pressed sizing, and individual eco-polybag packaging.
Custom reversible samples are billed at double the wholesale FOB unit price plus a nominal USD 30 CAD pattern development fee per style. When you proceed with bulk production, this USD 30 fee is 100% credited against your production deposit. Physical samples take 1 to 3 weeks when using our extensive in-stock fabric colors, followed by 3–5 days transit via DHL Express.
Traditional underwire channels cannot be completely hidden in a reversible garment. However, our CAD team constructs reversible support through double-layer fabric compression zones, reinforced under-bust elastic tunneling encapsulated between both face layers, and self-tie contour configurations that provide lift and shaping without unsightly hardware.
All plain fabrics carry OEKO-TEX® Standard 100 and GRS certifications. We utilize ECONYL® regenerated nylon derived from ocean fishnets and post-consumer textile carpets. Socially, every technician and sewist in our Kerobokan facility receives double the local minimum wage, complete health insurance, paid family leave, and safe, climate-controlled studio conditions.
Swime Swimwear Co., Ltd. developed our hero reversible one-piece line. The CAD pattern team completely solved our edge roll-over issue on the first sample iteration. Our sell-through in Sydney retail was 92% in 4 weeks!
Finding an ethical supplier capable of precision digital printing on recycled nylon without bleed-through was crucial for our reversible line. Swime Swimwear Co., Ltd. exceeded every expectation.
The in-stock Carvico Vita inventory makes a huge difference. While other manufacturers quote 12 weeks just for fabrics, Swime delivers complete reorders directly to Poland in under a month.
Partner with Bali's premier swimwear manufacturer since 1993. Submit your sketch, tech pack, or mood board to receive an itemized commercial cost sheet and fabric breakdown within 48 hours.
